APOLLO Discovery Manual Call Point

Plug and Play terminal connection for fast wiring. Continuity link for wiring test before commissioning. Report alarm under 0.2 seconds.

Standards: EN 54-11
Approvals: LPCB, CPR

Weight: 180g
Colour: Red
Materials Housing: Polycarbonate
Product Length: 88mm
Product Width: 88mm
Product Depth: 59mm
Detection Principle: Operation of a switch.
Key Type: KAC Manal Call Point test & reset key


A seven-segment DIL switch enables addressing of each call point at the commissioning stage. When operated, the manual call point interrupts the polling cycle for a fast response. Bi-coloured LEDs indicate isolate and normal conditions.

The Apollo Discovery Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated by pressing the resettable element. The manual call point signals to the control and indicating equipment using an interrupt feature within the Apollo digital communication protocol. An alarm status is indicated by a yellow and black bar in the lower section of the resettable element and a red LED. The manual call point can be easily reset from the front using the supplied reset key. It is available in two versions, with and without isolator. The manual call point is intended for indoor applications.


There are no reviews yet.

Be the first to review “APOLLO Discovery Manual Call Point”

Your email address will not be published.

error: Content is protected !!
Scroll to Top