PROGRAM Gas Extinguish Panel

Model Normal Weatherproof
Size in mm ( W x H x D )
PE – GA2000 430 x 370 x 170 430 x 380 x 170
PE – GA4000 550 x 390 x 170 550 x 400 x 170

PROGRAM Gas Fire Extinguishing Panel, Model : PE-GA2000 is manufactured and tested in accordance to EN 54-2 : 1997 (which is equivalent to MS 1745-2 : 2004) and also conformed to local CIFS requirements.

The discharge can be automatic, using two zones double knock detection system or manual release system by using a 24V DC electrical key switch or mechanical pull bar system applied directly on the gas cylinder. This control and indicators are housed in a compact enclosure finished with signal red epoxy powder paint. This is applicable for all sub-stations, server rooms, transformer rooms, switch rooms and paint boots.

Standard Features

  • Power Source Indicators
  • Power Failure Indicators
  • Zone Fire, Fault and Isolate Indicators
  • Bell Isolate Switch and Indicator
  • Auxiliary Trip Isolate Switch and Indicator
  • Gas Isolate Switch and Indicator
  • Fault Buzzer Mute Switch
  • Master Reset Switch
  • Main on/off Switch
  • Test Battery Switch
  • Earth Fault Supervisory
  • Built-in Delay Discharge Timer (Adjustable)
Power Supply Input 240V AC 50Hz
Operating / System 24V DC
Charger Auto / Trickle
Charging Rate 300mA (Trickle)
2.5A (Boost)
End of Line 8K2 Ohms
Auxiliary Output 24V, 1 Amp
FAP Output N/O Contact
Standby Mode
Master 75 mA
Per Zone (c/w Detectors) 5 mA
Flashing Light (Green LED) 75 mA
Alarm Mode
Master 140 mA
Per Trigger Zone 70 mA
Output Devices 200 mA
Flashing Light (Red LED) 75 mA
Per Bell 30 mA

Reviews

There are no reviews yet.

Be the first to review “PROGRAM Gas Extinguish Panel”

Your email address will not be published.

error: Content is protected !!
Scroll to Top